For annotations created in Draw, two distinct kinds of Layer elements are involved: – Visual LAYERS can be created using the form available in the “Home” tab: LAYERS can be created directly from the command line using NEW LAYER, positioned below the VIEW. When this element is set as the CE, any annotation you create
This appendix lists the Isodraft error messages that may appear on‑screen or in the message file. Any other messages that may be displayed are not included here, as they are not specific to Isodraft. Note: Many of the messages encountered during Isodraft operation originate from design or cataloguing inconsistencies rather than incorrect use of Isodraft.
Because the North arrow symbol cannot be modified through Isodraft syntax, it may be necessary to embed a custom symbol in the drawing template. Disable the default North arrow in the Isodraft option file, or set its coordinates to 0 mm, 0 mm to suppress it. After suppression, insert a fixed North arrow symbol in the isometric
How can I make the Gearbox Orientation appear on the isometric? Resolution P‑point numbering, position, and orientation are critical when defining a component in the E3D Paragon module. For valves in particular: See image here below: You can adjust the displayed notation by editing ATEXT number 346.
When the coordinates and/or the orientation of the 3D model elements do not align with the World coordinate system and/or cardinal axes and the required positional coordinates displayed on Piping isometrics need to be referenced from an alternate element other than the WORLD /*. Resolution Using the AXES command in ISODRAFT will help resolve this issue. By
Are you having a font size issue when opening an E3D module in Aveva Unified Engineering ? Typically this happens when the scale is not set to 100% and set to a value of 125% or higher.
Up until E3D Series 3, exporting IFC files was limited by the number of elements that could be processed, because the application was still running in 32‑bit. We tested to export a Site containing more than 10,000 elements, and the export was not possible due to this limitation. With E3D Series 4 (Unified Engineering), this
At the moment, there is no dedicated tool or attribute that directly provides the internal volume of a pipe. However, a pseudo‑attribute can be used to approximate it: BRWWEI. This pseudo‑attribute returns the wet weight of the pipe (or branch or individual component, depending on the current CE), meaning the weight including the fluid. The
In earlier versions, the Old Bolt Calculation Method did not include support for bolt weights. The attributes BLTWEIGHT and BWEIGHT were introduced later to provide this functionality. An example from the legacy Aveva PDMS documentation is shown below: Resolution Bolt Weights can be set using BLTWEIGHT attribute at SBOL element and BWEIGHT attribute at DTAB
